Interior designers believe that every wall needs to have a Central focal point of interest, from which flow all other elements.

Feature of 3D wall panels is the easiest way to achieve this goal. Decor 3D wall panels bring modernity to your interior with designs and textured walls. 3D wall panels – an exciting range of decorative, textured wall panels with patterns carved into their surface. Feature wall in 3D panels creates a huge impact, lending an architectural sense for a relatively low cost. 3D panels can turn ordinary interiors into spectacular, instantly. No need to buy expensive artworks and furniture when the dramatic, sculpted wall panels are the main feature of the room. Wall with 3D panels when fitted together form an elegant design patterns. They are a new trend in wall coverings.

After easy installation they can be painted in any color to match the interior of your home or office. The result is an economic, friendly interior wall decor product which creates a stunning, rich and modern look to any interior design. Panels can be installed for commercial use: hotels, offices, retail outlets, restaurants. They can be applied even on the ceilings. 3D panels bring your walls to life! Panels are widely used outside when they are covered with a waterproof polymer. Repeating modules (panels, tiles and blocks)are easy to cut on site. Low mounting kits ensure the use of responsible, tested materials.

3D panels can be mounted on the wall for permanent stay or as temporary modular panels that can be removed from the wall in no time. When installing directly on the wall is simply to measure the area, decide on a layout, and do mark for installation. Use hot glue several times to glue the edges and center of the back side, and press the tile to the wall. You will need to hold it for about a minute to allow the glue to harden I. If you are installing tiles in multiple rows – it is recommended to start with the center and gradually move to the edges. If you decide to create a mobile group or the headboard, using panels is to use the same installation technique.

Raw materials used for production of 3d panels is the fibrous residue that remains after sugar cane stalks ,which are crushed to extract their juice. Thus, it can be argued that this fibrous residue is used as raw materials are 100% recyclable. Bagasse, as a residue of sugarcane, is one of the most renewable in the world, because sugar cane can collect up to 3 times a year. Gross collection worldwide more than 1.2 billion tons. year. Raw panels, pulp, at the end of its life cycle it is 100% biodegradable. In addition to creating a unique style of 3D panels can be used in furniture, such as doors on entertainment units and small cabinets (thickness 25 mm).

They do a stunning view of the bar and reception, chair beds and more.

3 thoughts on “3D PANEL DESIGN

  • April 22, 2017 at 2:11 pm

    That’s an inventive answer to an inertesting question

  • April 22, 2017 at 5:40 pm

    Furrealz? That’s maelsvourly good to know.


Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.