PVC panels for bathroom: how to assemble

The design of the bathroom walls is critical, as this space is usually high humidity. For this reason, for finishing work will not be suitable for all materials. The main requirement for them is water resistant. Well it a tile, but it is expensive and time-consuming to assemble. Therefore, many owners have resorted to the use of a material such as PVC panels for the bathroom.

The walls in the bathroom using plastic panels

The contents

  • 1 PVC Panels for bathroom: the benefits and disadvantages
  • 2 the Choice of panels on bathroom wall
  • 3 step-by-Step instruction for installation of PVC panels for bath
    • 3.1 Preparation of walls
    • 3.2 Choice of hardware
    • 3.3 Installation of panels
    • 3.4 Finish bathroom panels PVC with their hands (video)

PVC panels for bathroom: the benefits and disadvantages

PVC wall panels are a modern finishing material. They are made of polymer material, so don’t miss the water. This material is for walls manufactured in 3 metre hollow perforated inside panels. This length allows the installation without horizontal joints in all living rooms. Their width may be of several standard sizes.

The front of the panels have different patterns and coloring. The ends of the products have special locks for easy installation. Decoration the material must be purchased along with it various additional elements: internal and external corners, trims and borders.

PVC panels for bathroom walls — economical and practical option

The most economical option walls in the bathroom is a separate cladding PVC panels for the bathroom. The advantages of this option:


  • The cheapness of the material. The cost of plastic panels compared to the tiled lower several times.
  • Low cost manufacturing operations. In addition, the finish can easily produce their own hands.
  • The ease and speed of installation.
  • The lack of “wet” stages of work at the device walls.


The choices of colors of plastic panels

Of the shortcomings can be noted: no durability, poor environmentally friendly plastic panels and poor design choices. Although there are a large number of colors and patterns, freedom in design is limited because of the peculiarities of dimensions and of the installation of the material.

The choice of panels on bathroom wall

If you decide to make a wall decoration PVC panels for bathroom, you need to properly make their choice. There are several types of plastic wall panels, of which PVC is the cheapest option. At the same time, the material has good water resistance, allowing it to be used in rooms with high humidity such as a bathroom.

Related article:

Photo bathroom renovation small size create the bathroom wisely. Plan space: the choice of tiles, lighting, plumbing, furniture, washing machine. Pipes and waterproofing.

If you choose PVC panels should pay attention to the fact that they were missing various relief decoration. They give more volume and originality, but only in the bathroom, these things can cause the accumulation of dirt and mold, which is unacceptable.

The moldings used for mounting of PVC panels

Colors should match the size of the room. The smaller it is, the brighter must be the colors. Dark colors visually reduce the space. The use of black color is unacceptable, because it clearly will be visible to any minor contamination. The most optimal seems to use bright blue and green tones. This range promotes relaxation and rest. Bright colors of the red spectrum cause excitement and aggression.

The combination in the decoration of the bathroom of ceramic tiles and PVC panels

Style there are different drawings. It can be natural motifs: flowers, leaves, the blue of the sea. Geometric shapes on the surface of the walls also do not lose their relevance. In commercially available panels in the form of panels with different compositions, but they are much more expensive. The choice of style and colors must obey the tastes of the owners and to be deliberate in every detail.

A useful tip! When planning work for installation of plastic panels in the bathroom need to immediately determine the place of fastening of the various cabinets, shelves and other interior elements. These places need to fix wooden bars or profiles. This will help to firmly secure these items on the walls without damaging just mounted panel.

PVC panels in the bathroom

Step-by-step instruction for installation of PVC panels for bath

To separate the walls of the bathroom plastic panels is no big deal. Any man with skills of repair work, capable of making high-quality veneer, if you will follow certain guidelines.

Before starting work it is necessary to calculate the need for materials. To do this, simply measure the perimeter of the bathroom. Most often one panel has a width of 25 cm Therefore, for lining 1 meter is enough to use 4 panels. If the width differs from the standard, the calculations need to be done individually. But the basic material required to get the corners and other additional elements. Their number count is also not difficult.

The tools needed for the installation of plastic panels

A useful tip! To buy in store material needed with a small margin, as the corner panel is likely to be clipped. In the calculations we must not forget to subtract the area of the doorway.

If the installation is planned for the crate, you must purchase the desired number of guide profiles. They need at least three on each wall, although it can be more. When mounted on the liquid nails or glue this is not necessary. There must be a tool: a screwdriver, a sharp knife and a sealant gun.

Panels and furniture in the bathroom matched in one color

Preparation of walls

The advantage of plastic panels is their ability to hide all the irregularities of the surface. So the walls in any serious training not needed if no bumps greater than 10 mm. height. Such irregularities can be simply cut off, without paying them much attention. This is not the case if you plan panel to stick. In this case, the wall must be perfectly smooth.

Is in preparation for the work to pay attention to the transaction. If the wires are old and they are on the surface of the walls, it is better to replace them, because then that would be problematic. Not be amiss and the application of wall waterproofing material. This is especially true if the walls are wooden.

Plastic panel white color in the bathroom

The choice of fastener

Attached plastic panels to the walls can two ways: on the glue and guide. The first method is the easiest, but has several disadvantages. It is only suitable for perfectly flat walls. Glued panels are then very difficult to detach from the wall, making it difficult to dismantle in case of a new repair.

Possible forms and textures of PVC panels

The installation of panels for sheathing is the most convenient way. While minor irregularities of the walls can not pay attention, and to disassemble such a structure, if necessary, is not difficult. The crate can be made of wooden bars, but it is better to buy the factory plastic guide with a special lock for securing panels. This eliminates the need to screw in each panel by a few screws. In addition, wood in a humid environment will quickly begin to rot.

The guides are mounted horizontally on the ceiling, floor and in the middle. The panel is attached to the rails using special clamps, which greatly facilitates Assembly and disassembly.

Bathroom interior with the use of PVC panels can look very stylish

The installation of panels

Installation of PVC panels for bathroom, you should start from the corner located farthest from the entrance in the following sequence:


  • The first panel is cut to height and is secured with clamps or with screws to the guide rails vertically.
  • The next panel is inserted into the end face to each other in the castle. This allows them tight to plant and hide the fasteners.
  • Gradually closes the entire wall. Using a level, we need to control the verticality of the installation.
  • When he reached the corner, cut the extreme panel and close the transition to another wall area.
  • After completing the installation of all panels, the ends must be closed with edging profiles.
  • The design finishes is completed with the installation angles or cornices to the ceiling and skirting to floor.


The scheme of installation of PVC panels

All corners and joints where possible the penetration of moisture has to be treated with sealant. This will protect against the occurrence of unpleasant situations in future. At facing of walls plastic panels, the same material can be closed and the ceiling. This approach will protect against the penetration of moisture into the slab.

White panels of plastic in the bathroom

A useful tip! The owners of apartments in new buildings: recommended finish bathroom PVC panels. This will avoid cracking of the tile from shrinkage home. After 2 – 3 years you can make and tile floors.

If properly chosen and tastefully mount wall PVC panels in the bathroom, it will not only be functional and waterproof, but will look beautiful and stylish.

Finish bathroom panels PVC with their hands (video)


Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.